ar7220d1901b

Removing and installing rear door

Type ar · topic 72.20 · version 0101 · 2004-10-21

Applies to: MODELS 667.35, 668.35, 670.35 /45

Where it sits

Function group 3 Body › 72 Doors › 72.20 Tailgate, rear door — Series 667 (models 35*) · Series 668 (models 35*) · Series 670 (models 35*, 45*)

EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.43 Rear-end door — Series 667 (models 35*) · Series 668 (models 35*) · Series 670 (models 35*, 45*)

AR72.20-D-1901B

Removing and installing rear door

13.8.98

MODELS 667.35, 668.35, 670.35 /45

Removing and installing rear door

L72.20-0002-06

Illustration shows: Rear door hinged with opening angle 180°

1 Corner pillar paneling

2 Door holder

3 Fastening device

4 Rear door, right

5 Hinges, right

6 Screws

7 Hinges, left

8 Rear door, left

Removing, installing

1.1

Remove fastening devices (3) on door holders (2)

Rear door hinged with opening angle 180° only

1.2

Detach door holder (2)

Rear door hinged with opening angle 180° only

2

Remove screws (6) of upper and lower door hinges (5, 7)

Mark position of hinges on corner pillar before removal of rear doors.

3

Remove rear doors (4, 7)

When replacing rear door, supplement existing sealing and cavity preservation before painting.

MB body sealing compound for seam sealing (suitable for painting)

4

Install in the reverse order

5

Adjusting rear door

AR72.20-D-1032C

Referenced documents