ar7220d0100ts

Remove/install upper rotary tumbler on rear-end door

Type ar · topic 72.20 · version 0100 · 2018-04-11

Applies to: Model 907.6/7, 910.6

Where it sits

Function group 3 Body › 72 Doors › 72.20 Tailgate, rear door — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 907 (models 6**, 7**) · Series 910 (models 6**)

AR72.20-D-0100TS

Remove/install upper rotary tumbler on rear-end door

15.02.2018

Model

907.6/7, 910.6

Remove/install upper rotary tumbler on rear-end door

D72.20-1258-09

Shown on left rear-end door (2)

1

Bolts

3

Upper rotary tumbler

2

Rear-end door

4

Cable

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1.1

Remove inner door trim from rear-end door window frame (2)

Model 907.6/7
with code VA5 (Fully lined hinged rear doors)

AR72.20-D-6616TS

1.2

Remove door trim at top of rear-end door (2)

Model 907.6/7, 910.6
with code VA2 (Load space int. trim up to roof (wood))
Model 907.6/7, 910.6
with code VA3 (Interior trim, cargo bay to roof height, washable)

2

Mark position of screws (1) on inner door panel of rear-end door (2)

3

Remove screw/bolts (1)

Installation: Observe markings.

Screw, rotary tumbler to top of rear-end door

*BA72.20-N-1001-01TS

4

Remove upper rotary tumbler (3) from rear-end door (2) until cable (4) is accessible

5

Remove cable (4) from upper rotary tumbler (3) and remove upper rotary tumbler (3)

6

Install in the reverse order

Check

7

Perform a function check of the upper rotary tumbler (3)

8

Check whether the upper rotary tumbler (3) and the lower rotary tumbler open simultaneously when the left rear-end door (2) is opened

If the upper rotary tumbler (3) and the lower rotary tumbler do not open simultaneously.

Adjust the bearing bracket.


AR72.20-D-4014-01TS

Rear-end door

Number

Designation

Model 907.6/7, 910.6

BA72.20-N-1001-01TS

Screw, rotary tumbler to top of rear-end door

Nm

13

Referenced documents