ar7216s4012c

Remove/install door handle bearing bracket of sliding door

Type ar · topic 72.16 · version 0105 · 2016-10-26

Applies to: Model 415.603/605/7

Where it sits

Function group 3 Body › 72 Doors › 72.16 Sliding doors — Series 415 (models 603, 605, 7**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 415 (models 603, 605, 7**)

AR72.16-S-4012C

Remove/install door handle bearing bracket of sliding door

25.10.2016

Model

415.603/605/7

Remove/install door handle bearing bracket of sliding door

Shown right sliding door

1

Seal

2

Bearing bracket

3

Rivet

4

Wire

S72.16-4588-04

Remove/install

1

Remove sliding door paneling

AR72.16-S-6610C

2

Remove door foil from sliding door


Model 415.603/605/7
with code V23 (Interior panelling higher execution)

AR72.16-S-6620C

3

Remove outside door handle

AR72.16-S-2220C

4

Remove gasket (1)

Installation: Ensure that seal (1) is seated properly.

5

Remove bearing bracket (2)

General information on riveting

AH60.00-P-0003-01N

Commercially available devices/tools
Blind rivet tool

Removal: For this purpose drill out rivet (3) and unhook wire (4).

Installation: Replace rivet (3).

6

Install in the reverse order

Referenced documents