ar7216l2220va

Remove/install outer door handle on sliding door

Type ar · topic 72.16 · version 0102 · 2005-05-24

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 72 Doors › 72.16 Sliding doors — Series 414 (models 700)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 414 (models 700)

AR72.16-L-2220VA

Remove/install outer door handle on sliding door

30.4.01

MODEL 414.700

Remove/install outer door handle on sliding door

L72.16-0015-06

1 Door handle

2 Bolt

3 Rubber grommet

4 Underlay

5 Underlay

6 Operating cable

Remove/Install

1

Remove rubber grommet (3)

2

Unscrew screw (2)

*BA72.16-P-1001-01A

3

Slide door handle (1) toward rear (arrow) and remove with operating cable (6) hooked in from door skin

Installation: Insert door handle (1) into sliding door and slide toward front up to stop
Ensure that underlays (4, 5) are seated properly.

4

Unhook operating cable (6) from bracket and operating lever (arrows).

When the Bowden cable transfer lever is damaged by improper removal, observe modified parts scope.

5

Remove door handle (1), remove underlay (4), unclip bearing bracket with underlay (5) from door handle (1), remove underlay (5).

Installation: Check underlays (4, 5) for damage; replace if necessary.

6

Install in the reverse order

7

Check door lock release for proper function

For this purpose, close rotary tumbler on door lock with suitable tool and actuate door handle (1).

Sliding doors

Number

Designation

Model
414.700

BA72.16-P-1001-01A

Bolt, outside door handle to sliding door

Nm

8