AR72.16-D-7844A | Remove/install sliding door bottom carriage | 28.6.11 |
MODEL 900 with CODE (T16) Right load compartment sliding door
MODEL 906.6/ 7
D72.16-1294-09
1 Cable track
2 Sectional molding
3 Bottom carriage
6 Door catch cable
7 Control cable guide
4 Bracket
5 Cable bracket
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove lower guide rail | ||
2 | Mark wiring harness on cable track outlet | For this purpose hold wiring harness under tension by pulling slightly and mark wiring harness length at cable track outlet with insulation tape. | |
Installation: Ensure that the marking is positioned at the track outlet or the length of the wiring harness between the cable track outlet and the 1st cable tie (area A) is 90 mm with short wheelbase and 205 mm for all other wheelbases. Observance of this minimum dimension prevents clicking noises from occurring when the sliding door is opened. | |||
3 | Unclip cable track (1) from section molding (2) | ||
4 | Unscrew lower carriage (3) from brackets (4) | Mark position before removal. | |
5 | Unscrew bracket (4) from sliding door | Mark position before removal. | |
6 | Unclip cable track (1) from lower carriage (3) | Pry cable track (1) with screwdriver over casting lug (arrow) on lower carrier (3) | |
Installation: Ensure that the cable is routed correctly in the lower carrier (3) Never grease cable track (1). | |||
7 | Unclip cable holder (5) and unhook door catch cable (6) | When replacing lower carriage (3), transfer control cable guide (7). | |
8 | Install in the reverse order | ||
9 | Adjust lower carriage (3) | Model 906 without code (D03) Roof and rear-end doors, high version. | |
| |||
Model 906 with code (D03) Roof and rear-end doors, high version, Model 900 | |||
|
Sliding doors
Referenced documents
- ar7216d102301h Adjust gaps and sliding door ridge pattern
- ar7216d102301i Adjust gaps and sliding door ridge pattern
- ar7216d7816a Remove/install bottom guide rail for sliding door
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.