ar7216d6614ca

Remove/install window frame lining of sliding door

Type ar · topic 72.16 · version 0100 · 2016-11-14

Applies to: Model 900 with code ZO0 (Fuben fully equipped bus)

Where it sits

Function group 3 Body › 72 Doors › 72.16 Sliding doors — Series 900

EinPAS 36 Visibility › 36.15 Glass pane/window › 36.15.41 Side window — Series 900

AR72.16-D-6614CA

Remove/install window frame lining of sliding door

11.11.2016

Model

900

with code ZO0 (Fuben fully equipped bus)

Remove/install window frame lining of sliding door

D72.16-1367-09

1

Window frame paneling

3

Covers

2

Door trim

4

Retaining clips

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove door trim (2)

AR72.16-D-6611CA

2

Remove inside door opener at sliding door


Model 900.6
with code T16 (Sliding door right)
with code ZO0 (Fuben fully equipped bus)

AR72.16-D-6600G

3

Unclip covers (3)

Clip remover

*452589016300

4

Unscrew screws/bolts present under the covers (3)

5

Unclip window frame lining (1) at top, in the area of retaining clips (4)

Installation: Check retaining clips (4).

Mounting wedge

*110589035900

In case of damaged retaining clips (4)

Replace the retaining clips (4).

6

Remove window frame lining (1) from sliding door


Carefully extend window frame lining (1) in the area of the emergency opener (arrow A) and the door bumper (arrow B).
Otherwise the cutouts on window frame lining (1) can get damaged.

7

Install in the reverse order

Remove/install window frame lining of sliding door
Remove/install window frame lining of sliding door

452 589 01 63 00

Clip remover

110 589 03 59 00

Mounting wedge

Referenced documents