ar7216d4035ts

Remove/install sliding door lock

Type ar · topic 72.16 · version 0100 · 2018-04-06

Applies to: Model 907.6/7 except code T55 (Electric operation of sliding door on right) except code T56 (Electric operation of sliding door on left) Model 910.6

Where it sits

Function group 3 Body › 72 Doors › 72.16 Sliding doors — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 907 (models 6**, 7**) · Series 910 (models 6**)

AR72.16-D-4035TS

Remove/install sliding door lock

16.03.2018

Model	907.6/7
	except code T55 (Electric operation of sliding door on right)
	except code T56 (Electric operation of sliding door on left)
Model	910.6

Remove/install sliding door lock

D72.16-1383-09

Shown on right sliding door (2)

1	Door lock		2	Sliding door		4	Cables
1.1	Cable		3	Bolts		5	Bearing bracket

 Warning	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
Topical note	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1	Remove lower door trim of left and/or right sliding door (2).	Model 907.6/7 with code VA1 (Load compartment trim up to belt rail standard) or with code V4A (Right load compartment sliding door full trim), model 907.6, 910.6 with code VA2 (Load compartment interior trim up to roof height (wood)) or with code VA3 (Load compartment interior trim up to roof height, can be washed)
		Model 907.6/7 with code VA1 (Load compartment trim up to belt rail standard), model 907.6, 910.6 with code VA2 (Load compartment interior trim up to roof height (wood)) or with code VA3 (Load compartment interior trim up to roof height, can be washed)	AR72.16-D-6612TS
		Model 907.6/7 with code V4A (Right load compartment sliding door full trim)	AR72.16-D-6612TSB
2	Remove upper rotary tumbler.	Model 907.6/7, 910.6 with code D03 (Roof and rear-end doors, high version), model 907.6 with code D05 (Super-high roof) or with code D06 (Super-high roof painted in vehicle color)
			AR72.16-D-4034TS
3	Remove screw/bolts (3).	 Bolt, door lock to sliding door	*BA72.16-N-1002-01TS
4	Get into load compartment or passenger compartment and close sliding door (2) until door lock (1) is accessible.	 Door lock (1) must not be locked.
5	Remove door lock (1) from sliding door (2) until cables (4) at door lock (1) can be accessed.	 Number of cables (4) varies depending on the vehicle equipment.
6	Remove cables (4) from door lock (1).
7	Remove cable (1.1) from bearing bracket (5).
8	Remove cable (1.1) from inner door panel of sliding door (2).	 Installation: Replace damaged fasteners.
9	Disconnect electrical connectors at door lock (1) and remove door lock (1) together with cable (1.1) from sliding door (2).
10	Install in the reverse order.
	Check
11	Perform function test of door lock (1).

 Sliding door

Number	Designation		Model 907.6/7, 910.6
BA72.16-N-1002-01TS	Bolt, door lock to sliding door	Nm	10

Referenced documents

ah6800n000101s Notes on carrying out repair work in the vehicle interior
ar7216d4034ts Remove/install upper rotary tumbler on sliding door
ar7216d6612ts Remove/install sliding door trim pieces
ar7216d6612tsb Remove/install sliding door trim pieces
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.