ar7212p2510rt

Remove/install rear door lock

Type ar · topic 72.12 · version 0200 · 2010-07-28

Applies to: MODEL 164, 251

Where it sits

Function group 3 Body › 72 Doors › 72.12 Rear door — Series 164 · Series 251

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 164 · Series 251

AR72.12-P-2510RT

Remove/install rear door lock

20.7.10

MODEL 164, 251

Remove/install rear door lock

P72.12-2650-07

Shown on model 251.1 with code (889) KEYLESS-GO

1 Door module

Remove/install rear door lock

P72.12-2651-09

Shown on model 251.1 with code (889) KEYLESS-GO

1 Door module

2 Rubber grommet

3 Clutch

4 Lock button

5 Connector

6a Spreading pins

6b Expansion clips

7 Rubber grommet

A Assembly position

B Operating position

Modification notes

6.7.10

Model 164 added

Step 1

AR72.12-P-0103GZ

Remove/install

1

Remove door module (1) on rear door

Model 164

AR72.12-P-0103GZ

Model 251

AR72.12-P-0103RT

2

Disconnect plug on connector (3) from door lock, unlock lock catch (4) with suitable tool and remove connector (3) from locking mechanism.

3

Unplug connector (5)

4

Press expansion pins (6a) toward outside with suitable tool

5

Press expansion pin (6b) toward outside, remove door lock from door module (1); remove lock rod with rubber grommet (2) and release cable with rubber grommet (7)

Installation: Before installing raise lock catch on locking mechanism and move locking mechanism to assembly position (A). After installing door module (1) in rear door, move locking mechanism to operating position (B) and fasten bolts on door panel

6

Install in the reverse order

Referenced documents