ar7212p1013rt

Remove/install inner sealing rail on rear door

Type ar · topic 72.12 · version 0100 · 2005-05-02

Applies to: MODEL 251

Where it sits

Function group 3 Body › 72 Doors › 72.12 Rear door — Series 251

EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.43 Rear-end door — Series 251

AR72.12-P-1013RT

Remove/install inner sealing rail on rear door

3.2.05

MODEL 251

Remove/install inner sealing rail on rear door

P72.12-2605-11

1 Inner sealing rail

2 Rear door

Remove/Install

1

Remove door lining from rear door (2)

AR72.12-P-1010RT

2

Pry inner sealing rail (1) off of rear door with mounting wedge

Do not twist sealing rail to prevent damage

Removal: Carefully and uniformly pry rail off upward with mounting wedge.

Installation: Observe installation position.The coated side of the inner sealing rail (1) should point toward the window.The inner sealing rail (1) should make completely contact with the inner door panel.

Mounting wedge

*110589035900

3

Install in the reverse order

Remove/install inner sealing rail on rear door

Mounting wedge

110 589 03 59 00

Referenced documents