Series
en
ar7210w2400a
Remove/install outside door handle on front door
Type ar · topic 72.10 · version 0111 · 2014-01-23
Applies to: MODEL 374.6 with BODY 374.870 MODEL 374.6, 940, 942, 943, 944 with BODY 944.890 MODEL 375.4 with BODY 375.840/860 MODEL 944 with BODY 944.899 MODEL 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 with BODY 942.899
Where it sits
Function group 3 Body › 72 Doors › 72.10 Front door — Series 374 (models 6**, 870) · Series 375 (models 4**, 840, 860) · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 0**, 1**, 2**, 3**) · Series 952 (models 0**, 1**, 2**, 3**) · Series 953 (models 1**, 3**) · Series 954 (models 0**, 1**, 2**)
EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 374 (models 6**, 870) · Series 375 (models 4**, 840, 860) · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 0**, 1**, 2**, 3**) · Series 952 (models 0**, 1**, 2**, 3**) · Series 953 (models 1**, 3**) · Series 954 (models 0**, 1**, 2**)
AR72.10-W-2400A
Remove/install outside door handle on front door
13.01.2014
MODEL
374.6 with BODY 374.870
MODEL
374.6, 940, 942, 943, 944 with BODY 944.890
MODEL
375.4 with BODY 375.840/860
MODEL
944 with BODY 944.899
MODEL
950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 with BODY 942.899
1
Screw
2
Screw
3
Release linkage
4
Release linkage
5
Door handle
6
Safety clamp
Remove/install
1
Remove door liner on front door
AR72.10-W-6575A
Model 374, 375, 940, 942, 943, 944, 958
AR72.10-W-6575B
2
Move door lock to locked position
3
Disconnect electrical connector behind door handle (5)
Only on driver door, on vehicles with code FZ3(Convenience locking system with remote control) or with code FZ5(Anti-theft alarm system with load compartment motion sensor (ATA))
4
Remove screw/bolts (1, 2)
Bolt, door handle to front door
*BA72.10-N-1003-01B
5
Slide door handle (5) forward (arrow A)
6
Pull door handle (5) out of door (arrow B)
7
Mark release linkage (3, 4)
It is necessary to mark the release linkage (3, 4) to ensure proper installation.
8
Unclip retaining clips (6) from release linkage (3, 4) and unhook release linkage (3, 4) from door handle (5), remove door handle (5)
Installation: Insert door handle (5) without tension.
Mounting wedge
*110589035900
9
Install in the reverse order
Number
Designation
MODEL 374.6
MODEL 374.5, 375.3/4, 944, 950.5/6, 952.5/6, 953.6, 954.5
BA72.10-N-1003-01B
Bolt, door handle to front door
Nm
7
7
Number
Designation
MODEL 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2
MODEL 940.1/2/3, 942.1/3, 943.1/3
BA72.10-N-1003-01B
Bolt, door handle to front door
Nm
7
7
Referenced documents
