S72.10-4605-07
1 | Grommets | 2 | Screw |
4 | Window(s) |
S72.10-4604-11
Danger ! | Risk of injury from contusions to hands if window glass is not secured | Secure window to prevent it from falling down. | |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Remove door liner on front door | ||
2 | Remove grommets (1) from door module | ||
3 | Open window (4) until bolts (2) are accessible through assembly openings in door module | For this purpose hold front door paneling and connect front door control unit. | |
4 | Loosen bolts (2) until window (4) can be removed from brackets on power window | ||
5 | Adjust power window to lower end position | Secure window (4) against falling down.. | |
6 | Tilt window (4) at rear in direction of arrow and remove upward from window channel on front door | ||
| Install | ||
7 | Install window (4) in window channel of front door and tilt opposite direction of arrow | Secure window (4) against falling down.. | |
8 | Open power window until bolts (2) are accessible through assembly openings in door module | For this purpose hold front door paneling and connect front door control unit. | |
9 | Install window (4) in bracket on power window | ||
10 | Screw in bolts (2) several turns | ||
11 | Slightly press window (4) down and in direction of A-pillar and tighten bolts (2) | Bolt/nut for attachment of side window to window lifter | |
| Check | ||
12 | Check power window for proper function | Check whether window (4) opens and closes correctly. | |
| Install | ||
13 | Install grommets (1) in door module | ||
14 | Install front door paneling |
Referenced documents
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar7210s6575e Remove/install front door panel
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.
- as6700z000201a Risk of injury from contusions to hands if window glass is not secured