P72.10-3158-07
Shown on vehicle with Keyless Go, code 889
1 Cover
2 Outer door handle
3 Cap
4 Bolt
5 Electrical connector
6 Lock cylinder
P72.10-3157-04
1 Cover
6 Lock cylinder
| Remove/Install | ||
| Work carefully to avoid damaging paint | ||
1 | Remove cap (3) | ||
2 | Loosen bolt (4) | Do not tighten bolt (4) too tightly to prevent damaging lock cylinder (6). | |
Bolt (4) is secured against falling down and cannot be unscrewed completely. | |||
| |||
3 | Remove lock cylinder (6) with cover (1) | Removal: Pull outer door handle (2) toward front and remove lock cylinder (6). | |
Electrical connector is disconnected when pulling out the lock cylinder (5)! | |||
Installation: Ensure that electrical connector (5) is seated properly. | |||
4.1 | Unclip cover (1) and remove from lock cylinder (6) | Only when replacing lock cylinder | |
5 | Install in the reverse order |
Front door