Remove/install crank window in front door

AR72.10-P-1900EC

Remove/install crank window in front door

5.2.10



Removing

1

Remove outer sealing rail

AR72.10-P-1700EC

2

Loosen door lining (2) and lay down to side with electrical connectors (7, 8) connected

AR72.10-P-1000EC

3

Press inner sealing rail (9) off of window channel with assembly wedge (10) starting at front and hook into electrical wiring harness (arrow A).



*110589035900

4

Remove adhesive pad (3, 5)

5

Switch on ignition

6

Move crank window (1) down until bolts (4, 6) are visible and the bolt (4) can be unscrewed.

7

Switch off ignition

8

Unscrew bolt (4)

9

Loosen bolt (6)

10

Remove crank window (1)

 Carefully remove crank window (1) from window channel to prevent damaging paint.

11

Unlock catch hook (arrow B) and transfer crank window mount (11)

When replacing crank window (1).

 Wedge shim (11.1) on crank window mount (11) should be positioned in center in relation to inner section (11.2) (arrow C). Ensure that threaded plate (11.3) is seated correctly in inner section (11.2).



Install

12

Insert crank window (1) into window channel

 Carefully insert crank window (1) into window channel to prevent damaging paint.

13

Tighten bolts (4, 6) to stop finger-tight

 Tighten bolts (4, 6) after basic setting of crank window (1)

14

Adjust crank window (1)

AR72.10-P-1950EC

15

Glue on new adhesive pad (3, 5)

16

Install inner sealing rail (9)

17

Install door lining (2)

AR72.10-P-1000EC

18

Install outer sealing rail

AR72.10-P-1700EC