Removing and installing door liner on front door

AR72.10-P-1000EA

Removing and installing door liner on front door

16.3.10

28.6.99

Removal procedure for inner door handle cover changed

Steps 2 and 3

 

Removing, installing



To avoid damaging the door liner, grind assembly wedge before use so that it coincides with the cover (2) width (arrow)

1

Open crank window

2

Press cover (2) out of catch with installation wedge at top

 Pull cover away from inner door handle max. 10 mm at top, danger of breaking pin (arrow)



*110589035900

3

Press cover (2) out of catch with installation wedge at bottom and remove

4

Unclip cover (3) and unscrew screw (4)

With code 292 (front side airbag)

5

Unscrew screw on lock escutcheon (5) and remove lock escutcheon downwards

6

Remove screws (6)

7

Press door lining (1) off inner door panel at bottom, front and rear using assembly wedge



 Guide each assembly wedge straight to the clips.

*110589035900

8

Lift door lining (1) out of retaining clips at the top of the sealing rail using assembly wedge and at the same time pull away from the inner door panel



*110589035900

9

Unhook control cable on interior door control

10

Put down door lining (1)

11

Check films, clips and sheet-metal nuts (arrows) on inner door panel and replace if necessary.

 Stick door film to inner door panel

*BR00.45-Z-1004-02A

12

Check clips on door lining and replace if necessary

13

Install in reverse order

Number

Designation

Order number

BR00.45-Z-1004-02A

Adhesive PVC 914

A 001 989 30 71