W72.10-0015-09
1 Door inside plate
2 Bowden cable of the door inside actuation
3 Torx screw
4 Bowden cable support
5 Cable fastening catches
6 Female connection outlet of the closing system (yellow)
7 Female connection outlet of the outside rearview mirror (blue)
8 Connector of the outside rearview mirror (blue)
9 Connector of the closing system (yellow)
| Remove and install | ||
Danger! | Risk of explosion from oxyhydrogen gas leakage. Risk of injury from caustic burns of skin, eyes and mucous membranes by battery acid (contains diluted sulfuric acid) or metal spray through short-circuit. Risk of poisoning when ingesting battery acid (contains diluted sulfuric acid) or absorbing lead through the skin and body orifices | It is forbidden to set fire, cause sparks, unprotected flames or smoking. Use gloves, clothing and acid protective glasses. Keep battery electrolyte only in appropriate and duly identified containers. | |
1 | Disconnect the negative battery cable. | ||
2 | Remove the door lining. | ||
3 | Disconnect the connectors of the outside rearview mirror (8) heating outlets and of the closing system (9). | ||
4 | Remove the female connection outlets (6) and (7). | Press back the retaining protrusions. | |
5 | Cut the electric wires fastening catches (5). | Installing: Thread the new fastening catches with the supports through the openings of the inside plate. | |
6 | Remove, through the inside plate, the Bowden cable support (4). | The support (4) may remain on the Bowden cable. | |
7 | Remove the door inside plate (1). | | |
8 | Install in reverse order. |
Front door
Referenced documents
- ar7215b2150d Remove/install door liner on hinged door
- as5410b000101a Risk of explosion from oxyhydrogen gas leak. Risk of skin eye and mucous membranes caustic burn injuries from battery acid (contains diluted sulfuric acid) or metal spray through a short-circuit. Risk of burns from short-circuit.