P68.80-2044-06
Shown on vehicle with sound system, code 810 and luggage compartment cover, code 723
1 Load compartment floor
2 Safety hook
3 Bolts
4 Lock
| Remove/install | ||
1 | Open rear-end door | ||
2.1 | Remove luggage compartment cover | Only on vehicles with luggage compartment cover, code 723. | |
See Operator's Manual | |||
3 | Set up load compartment floor (1) and secure against folding down. | Do not use safety hook (2) to secure. | |
4 | Unclip safety hook (2). | ||
5 | Remove bolts (3) | If present, carefully remove fabric trim on bolts (3) so that access to bolts (3) is ensured. | |
Installation: Glue on textile covering | |||
6 | Unclip lock (4) (arrows) and remove from load compartment floor (1) upward. | Installation: Check whether lock (4) functions properly when closing and opening load compartment floor (1). | |
7 | Install in the reverse order |