Remove/install wire mesh partition

AR68.74-S-7495C

Remove/install wire mesh partition

23.02.2016

Model

415.605

with code U76 (FOLD & LOAD rear bench seat with load protection grille)

1

Separating guard

3

Screw

5

Head restraint

2

Screw

4

Wing nut



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Push front seats forward completely and fold seat backrests forward

2

Fold passenger bench seat backrest with wire mesh partition forward (1)

3

Unscrew bolts (2) on left and right side of wire mesh partition (1) at the top and slide wire mesh partition (1) downward and out


Secure wire mesh partition (1) so it cannot fall.
Prevent damage.

 Installation: Ensure that washers and sleeves are correctly seated on bolts (2).

 M8

*BA00.10-N-1003-01A

4

Remove wire mesh partition (1)

 To do so, unscrew bolts (3) on left and right side of passenger bench seat backrest and remove wire mesh partition (1).

 Installation: Ensure that washers and sleeves are correctly seated on bolts (3).

 M8

*BA00.10-N-1003-01A

5

Remove head restraints (5)

Only when replacing wire mesh partition (1).

 To do so, unscrew wing nuts (4) and remove head restraints (5) from wire mesh partition (1).

6

Install in the reverse order

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

23

32

Phosphated

Nm

21

29

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1003-01A

M8

Galvanized

Nm

38

Phosphated

Nm

36