ar6874d0704f

Remove/install partition wall flap

Type ar · topic 68.74 · version 0100 · 2015-12-07

Applies to: Model 909.6 with code Z8A (Pre-installations - Mixto)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.74 Partition wall — Series 909 (models 6**)

EinPAS 37 Interior equipment › 37.65 Partition wall/wire mesh partition › 37.65.35 Partition wall/wire mesh partition — Series 909 (models 6**)

AR68.74-D-0704F

Remove/install partition wall flap

24.11.15

Model	909.6
	with code Z8A (Pre-installations - Mixto)

Remove/install partition wall flap

1	Partition wall flap
2	Hinges
3	Partition wall

D68.74-1127-12

 Danger !	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
 	Remove/install
1	Push both locks on partition wall flap (1) in direction of arrow
2	Unscrew bolts on hinges (2) from partition wall flap (1) and remove partition wall flap (1) from partition wall (3)
3	Install in the reverse order

Referenced documents

as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.