ar6850w3300a

Remove, install windshield roller sun blind

Type ar · topic 68.50 · version 0105 · 2008-03-20

Applies to: MODEL 957.### #V up to 207052 with BODY 957.810

Where it sits

Function group 3 Body › 68 Interior equipment › 68.50 Curtains, roller blinds, luggage nets, cargo retainers — Series 957

EinPAS 37 Interior equipment › 37.57 Light protection/sightproofing › 37.57.31 Roller blind/curtain — Series 957

AR68.50-W-3300A

Remove, install windshield roller sun blind

4.3.08

MODEL 957.### #V up to 207052 with BODY 957.810

Remove, install windshield roller sun blind

W68.50-1001-06

1 Cap

2 Screw

3 Trim

4 Clip

5 Center guide

6 Roller sun blind

7 Outer guide

8 Screw

9 Retaining clip

10 Screw

11 Trim

12 Trim

13 Trim

14 Grab handle

15 Left A-pillar paneling

16 Electrical connector

Remove/install

1

Remove support rod (14)

AR68.70-W-0300A

2

Unhook outer guide (7) on left and right

3

Remove paneling (13)

4

Loosen left A-pillar paneling (15) in upper area

5

Push center guide (5) at side (arrow) out of clips (4)

6

Remove covering caps (1)

7

Loosen bolts (2) and remove paneling (3) from roof frame

Do not unscrew bolts (2) completely.

8

Unhook retaining clips (9) from center guide (5).

9

Remove center guide (5)

Installation: Observe installation position of cutout on center guide (5)

10

Separate electrical connector (16)

Only for electric roller sun blind (6).

11

Unscrew bolts (8, 10) from roof frame and remove roller sun blind (6)

12

Install in the reverse order

13

Perform a function test

Referenced documents