ar6850d3450ec

Adjust roller sun blind

Type ar · topic 68.50 · version 0100 · 2005-08-11

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 68 Interior equipment › 68.50 Curtains, roller blinds, luggage nets, cargo retainers — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.57 Light protection/sightproofing › 37.57.31 Roller blind/curtain — Series 903 (models 6**)

AR68.50-D-3450EC

Adjust roller sun blind

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Adjust roller sun blind

D68.50-1138-09

1 Roller blind

2 Roller blind cassette

5 Opening

3 Bolts

4 Pin

	Adjust
1	Unscrew bolts (3) on left side of roller blind cassette (2)	 Remove roller blind (1) for entire adjustment work
2	Slightly pull roller blind cassette (2) apart on left.
3	Spray small quantity of oil into roller blind cassette (2) on left	 Spray suitable oil into opening (5).
4	Assemble roller blind cassette (2) on left
5	Screw bolts (3) in on left side of roller blind cassette (2)
6	Unscrew bolts (3) on right side of roller blind cassette (2)
7	Slightly pull roller blind cassette (2) apart on right
8	Pull pin (4) out of roller blind cassette (2) on right	 Pull pin (4) out of roller blind cassette (2) 6 to 8 cm on right while releasing pin (4).
9	Spray small quantity of oil into roller blind cassette (2) on right	 Spray suitable oil into opening (5).
10	Tension pin (4) by turning to right	 Tension pin (4) by turning twenty times.
11	Install pin (4) in roller blind cassette (2) on right	 Keep pin (4) under tension during this operation.
12	Assemble roller blind cassette (2) on right	 Keep pin (4) under tension during this operation.
13	Screw bolts (3) on right side into roller blind cassette (2)
14	Perform a function test
15.1	Readjust roller sun blind (1)	 Only if roller blind (1) runs too easily or too stiffly in guide.
		 Readjust cable at screw connector.