Remove/install scuff plate, support rod and left foot mat

Type ar · topic 68.30 · version 0103 · 2004-06-15

Applies to: MODEL 375.4 with BODY 375.840 MODEL 944 with BODY 944.899

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 375 (models 4**, 840) · Series 944

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.37 Footwell trim — Series 375 (models 4**, 840) · Series 944

EinPAS 37 Interior equipment › 37.46 Floor › 37.46.31 Floor covering, vehicle interior — Series 375 (models 4**, 840) · Series 944

EinPAS 37 Interior equipment › 37.56 Grab bars › 37.56.30 Grab bar, entrance — Series 375 (models 4**, 840) · Series 944

AR68.30-W-4415B

Remove/install scuff plate, support rod and left foot mat

23.10.01

MODEL 375.4 with BODY 375.840

MODEL 944 with BODY 944.899

W68.30-1015-11

Shown on body 944.899

1 Entrance paneling

2 Floor mat

3 Wheelhouse lining

4 Operating unit for level control

 	Remove/Install
1	Remove rear support rod	 The support rod is only inserted at bottom.
			*BA68.70-N-1001-01A
2	Remove scuff plate (1)
3	Remove wheelhouse paneling (3)	 It is not necessary to remove the control unit for the level control (4).
4	Remove seat		AR91.10-W-1000A
5	Remove floor mat (2)
6	Install in the reverse order

 Retaining rod

Number	Designation		Body 375.840 in model 375.4	Body 944.899 in model 944


BA68.70-N-1001-01A	Screw for retaining rod on cab	Nm	18	18