ar6830w4050k

Remove/install paneling on A-pillar

Type ar · topic 68.30 · version 0100 · 2013-02-11

Applies to: MODEL 967

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 967

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 967

AR68.30-W-4050K

Remove/install paneling on A-pillar

29.01.2013

MODEL

967

Remove/install paneling on A-pillar
Remove/install paneling on A-pillar

1

Paneling (top)

2

Paneling (bottom)

3

Grab handle

4

Door seal

W68.30-1198-03

W68.30-1197-03

Remove/install

1

Remove outer driver side footwell cover and footrests on driver side

Only when removing lower paneling (2) from A-pillar on driver side.

AR68.30-W-1310K

2

Remove footwell cover and edge protection strip at of passenger side entrance

Only when removing lower paneling from A-pillar on passenger side.

3

Remove support rod from A-pillar (3).

AR68.70-W-0302K

If only the lower paneling (2) or upper paneling (1) is removed, it is only necessary to detach the support rod (3) at bottom or top.

4

Detach door seal (4) from A-pillar in area of paneling (1, 2) to be removed

5

Remove upper lining (1) from A-pillar

The upper paneling (1) is fastened with clips. First detach in upper area.

Mounting wedge

*110589035900

6

Remove lower paneling (2) from A-pillar

7

Install in the reverse order

Remove/install paneling on A-pillar

110 589 03 59 00

Mounting wedge

Referenced documents