Remove/install side wall lining

AR68.30-W-1450D

Remove/install side wall lining

22.02.2016

Model

930, 932, 933, 934 with body 943.899

with code F02 (L-cab, single-cab)

except code F05 (M-cab)

Model

930, 932, 933, 934 with body 943.899

with code F04 (L-cab)

except code F05 (M-cab)

Model

930, 932, 933, 934 with body 943.899

with code F15 (MEGASPACE cab)

except code F05 (M-cab)

Model

930, 932, 933, 934 with body 943.899

with code F18 (MEGASPACE cab/single cab)

except code F05 (M-cab)

Modification notes

19.02.2016

Work procedure completely revised.

Shown on vehicle with code F04 (L-cab) and code SM2 (Bed, top, one-piece, with lower bed)

1

Top bed

2

Blind

3

Stowage box/tray

4

Door seal

5

Grab handle

6

Stowage box/tray

7

Side wall lining

8

Stowage box

9

Mattress

10

Compressed air gun

11

Bracket

A70

Switch module 13, rear wall

E31

Bottom bunk lamp

A

Vehicle with code YK4 (Compressed air gun, loosely included)

Pfeil A

Retaining lug

Vehicle with code F02 (L-cab, single cable) or with code F18 (MEGASPACE cab/ single cab)

7

Side wall lining

12

Interior lamp

13

Stowage box/tray

14

Seat backrest

Pfeil B

Retaining lug

Vehicle with code F04 (L-cab) or with code F15 (MEGASPACE cab)

7

Side wall lining

15

Padding

 

Remove/install

1

Switch off ignition

2

Fold backrest on driver and passenger seat toward front and move driver and passenger seat to front-most position

3

Remove support rod (5)

AR68.70-W-0300B

4

Remove stowage tray (6)

 Pulling hook

*655589076300

5

Remove voltage converter on lower B-pillar

Only on vehicles with code ET1 (Voltage converter 24/12V, 8A) or with code ET2 (Voltage converter 24 V/12 V, 15 A).

6

Fold up upper bed (1)

Only on vehicles with code SM2 (Bed, top, one-piece, with lower bed) or with code SM6 (Deluxe bed, top, height-adjustable, with lower bed).

7

Remove mattress (9) on lower bed from stowage box

8

Remove stowage box (8)

Only when removing left side wall paneling (7).

 Bolt, stowage box to stowage box

*BA68.00-N-1001-01F

9

Remove bracket (11) from compressed air gun (10)

Only on vehicles with code YK4 (Compressed air gun, loosely included).

10

Detach door seal (4) in area of side wall paneling (7)

11

Remove cover (2) together with lower bunk lamp (E31) and remove switching module 13 rear wall (A70)

 The cover (2) is fastened to the stowage box/tray (3) with retaining lugs (arrows).

 Mounting wedge

*110589035900

12

Remove connector on lower bunk lamp (E31) and switching module 13 rear wall (A70)

13

Remove padding (15)

Only on vehicles with code F04 (L-cab) or with code F15 (MEGASPACE cab).
Only when removing side wall paneling (7) on right.

14

Remove backrest (14)

Only on vehicles with code F02 (L-cab, single cab) or with code F18 (MEGASPACE cab/ single cab).
Only when removing side wall paneling (7) on passenger side.

15

Remove stowage tray (13)

Only on vehicles with code F02 (L-cab, single cab) or with code F18 (MEGASPACE cab/ single cab).
Only when removing side wall paneling (7) on passenger side.

 The stowage box/tray (13) is fastened to the side wall paneling (7) at bottom with retaining lugs (arrows B) and at side with retaining clips.

 Pulling hook

*655589076300

16

Disconnect electrical connector from interior lamp (12)

Only on vehicles with code F02 (L-cab, single cab) or with code F18 (MEGASPACE cab/ single cab).
Only when removing side wall paneling (7) on passenger side.

17

Remove side wall lining (7)

 Pulling hook

*655589076300

 Mounting wedge

*110589035900

18

Transfer detachable parts on side wall lining (7)

Only when replacing side wall lining (7).

19

Install in the reverse order

 Interior equipment - General

Number

Designation

Model 930, 932, 933, 934

BA68.00-N-1001-01F

Bolt, stowage box to stowage box

Nm

20