Remove/install side wall lining

AR68.30-W-1450C

Remove/install side wall lining

22.02.2016

Model

930, 932, 933, 934 with body 943.899

with code F05 (M-cab)

except code F02 (L-cab, single-cab)

except code F04 (L-cab)

except code F15 (MEGASPACE cab)

except code F18 (MEGASPACE cab/single cab)

Modification notes

19.02.2016

Work procedure completely revised.

1

Stowage box/tray

2

Blind

3

Grab handle

4

Side wall lining

5

Door seal

6

Grab handle

7

Stowage box/tray

8

Stowage box

9

Cross strut

10

Compressed air gun

11

Padded stowage box/tray (only on vehicles with code SM4 (Padded stowage box/tray))

A70

Switch module 13, rear wall

E31

Bottom bunk lamp

A

Vehicle with code SL1 (Passenger seat with lying function)

B

Vehicle with code FE8 (Step for construction site vehicle)

C

Vehicle with code YK4 (Compressed air gun, loosely included)

 

Remove/install

1

Switch off ignition

2

Fold backrest on driver and passenger seat toward front and move driver and passenger seat to front-most position

3

Fold padded stowage box/tray (11) upward

Only on vehicles with code SM4 (Padded stowage box/tray).

4

Fold bunk upward

Only on vehicles with code SL1 (Passenger seat with lying function).

5

Remove stowage tray (7)

 Pulling hook

*655589076300

6

Install voltage converter on B-pillar

Only on vehicles with code ET1 (Voltage converter 24/12V, 8A) or with code ET2 (Voltage converter 24/12V, 15A).

7

Remove cross strut (9)

8

Remove stowage box (8) on left

Only when removing left side wall lining (4).

9

Remove stowage box on right

Only when removing right side wall lining.

10

Remove support rod (3) at top on B-pillar

Only on vehicles with code FE8 (Step for construction site vehicle).

 Screw for grab handle on cab

*BA68.70-N-1001-01A

11

Remove support rod (6) at bottom on B-pillar

AR68.70-W-0300B

12

Remove bracket from compressed air gun (10)

Only on vehicles with code YK4 (Compressed air gun, loosely included).

13

Detach door seal (5) in area of side wall paneling (4)

14

Remove cover (2) together with lower bunk lamp (E31) and remove switching module 13 rear wall (A70)

Only on vehicles with code SL1 (Passenger seat with lying function).

 The cover (2) is fastened on the stowage box/tray (1) with two retaining lugs.

 Mounting wedge

*110589035900

15

Remove connector on lower bunk lamp (E31) and switching module 13 rear wall (A70)

Only on vehicles with code SL1 (Passenger seat with lying function).

16

Remove side wall lining (4)

 Mounting wedge

*110589035900

 Pulling hook

*655589076300

17

Transfer detachable parts on side wall paneling (4)

Only when replacing side wall paneling (4).

18

Install in the reverse order

 Grab handle

Number

Designation

Body 943.899 in model 930, 932,933, 934

BA68.70-N-1001-01A

Screw for grab handle on cab

Nm

18