ar6830t4040c

Removing and installing inner pillar paneling

Type ar · topic 68.30 · version 0102 · 2010-03-29

Applies to: MODEL 613.364 /365

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 613 (models 364, 365)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 613 (models 364, 365)

AR68.30-T-4040C

Removing and installing inner pillar paneling

17.3.10

MODEL 613.364 /365

Removing and installing inner pillar paneling

Illustrated on left inner side of vehicle

1 Inner pillar paneling

2 Screws

3 Emergency hammer mount

4 Coat hook

T68.30-0021-03

Removing, installing

1

Remove emergency hammer mount (3)

Remove emergency hammer and unscrew mounting screws from emergency hammer mount

2

Remove coat hook (4)

Pry out plastic plug over mounting screw of coat hook with suitable tool.

3

Remove inner pillar paneling (1)

Unscrew screws (2) from inner pillar paneling.

Carefully loosen inner pillar paneling from top to bottom

The inner pillar paneling is fastened with adhesive tape over the entire length.

*115589035900

4

Remove adhesive tape

Installation: Replace adhesive tape.

Adhesive tape

*BR00.45-Z-1022-02A

5

Install in the reverse order

Removing and installing inner pillar paneling

Long wedge

115 589 03 59 00

Repair materials

Number

Designation

Order number

BR00.45-Z-1022-02A

Adhesive tape replaced by: A 005 989 70 85

A 005 989 29 85