ar6830t2000bb

Removing and installing steering column cover

Type ar · topic 68.30 · version 0100 · 2005-07-12

Applies to: MODEL 613.358 /388, 671.015 /020 /021 /030 /042 /332 /333 mit Lenksäule pneumatisch verstellbar'

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 613 (models 358, 388) · Series 671 (models 015, 020, 021, 030, 042, 332, 333)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 613 (models 358, 388) · Series 671 (models 015, 020, 021, 030, 042, 332, 333)

AR68.30-T-2000BB

Removing and installing steering column cover

31.10.01

MODEL 613.358 /388, 671.015 /020 /021 /030 /042 /332 /333
mit Lenksäule pneumatisch verstellbar

Removing and installing steering column cover

Shown on model 613.388

1 Boot

2 Base cover

3 Bolt

4 Front trim cover

5 Rear trim cover

T68.30-0023-03

Removing, installing

1

Switch off ignition

Remove ignition key.

2

Move steering column to rearmost upper position

See owner's manual.

3

Detach boot (1) from base cover (2)

4

Unscrew bolts (3)

Note different lengths of bolts.

The front trim cover (4) is attached to the rear trim cover (5) with two bolts.

5

Disengage snap catches (arrow) on both sides of steering column

6

Detach trim covers (4, 5)

7

Remove carpeting from footwell

8

Remove base cover (2)

Fastened with

- 4 bolts to the floor in model 671

- 2 bolts to the floor and 2 clips at the front of the footwell in model 613

9

Install in the reverse order