Shown with code W65 (Liftgate) |
1 | Frame seal |
2 | Retaining clip |
S68.30-4601-12
Shown on model 415.705 with code US8 (Individual seat, 2nd left rear row) with code US9 (Individual seat, 2nd right rear row) |
5 | Hook |
6 | Hook |
7 | Dome lamp |
8 | Screw |
9 | Headliner |
S68.30-4713-05
Shown with CODE W50 (Rear-end door, two-wing, 180 degrees without window) |
3 | Cover |
S68.30-4620-01
Shown with CODE V23 (Interior trim, luxury version) |
4 | Screw |
S68.30-4621-01
Danger ! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove sealing frame (1) in working area | Installation: Check for correct seating. | |
2 | Remove paneling (3) | Model 415 with code W50 (Rear-end door, two-wing, 180 degrees without window) | |
3 | Unhook safety net | Model 415 with code V78 (Luggage occupant protection system as net) | |
4 | Remove left and right bracket on safety net in headliner (9) | Model 415 with code V78 (Luggage occupant protection system as net) | |
To do this, unscrew screw/bolts. | |||
5 | Remove cover from hooks (5, 6) | Model 415.705 with code US8 (Individual seat, 2nd left rear row) Model 415.705 with code US9 (Individual seat 2nd right rear row) | |
6 | Remove hooks (5, 6) | Model 415.705 with code US8 (Individual seat, 2nd left rear row) Model 415.705 with code US9 (Individual seat 2nd right rear row) | |
Remove screw/bolt (8) to do this. | |||
7 | Unscrew bolt (4) on left and right side paneling | MODEL 415 with CODE V23 (Interior trim, superior version) | |
8 | Partially remove left and right paneling on side window in working area |
| |
Do not separate rear side paneling and paneling on side window. The paneling on the side window must be loosened in the area of the headliner (9). | |||
9 | Remove dome lamp (7) |
| |
10 | Remove headliner (9) | For this purpose remove retaining clips (2) with suitable tool and slightly push headliner (9) in direction of rear area. | |
Installation: Check retaining clips (2), replace if required. | |||
11 | Remove headliner (9) | For this purpose use second person to keep left and right paneling of side window away from working area, loosen headliner (9) from roof and remove toward front. | |
12 | Install in the reverse order |
Referenced documents
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar6830s1500c Remove/install side window frame lining
- ar8220s0117c Remove/install dome lamp in passenger compartment
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts