ar6830s4785ee

Remove/install paneling on rear center section

Type ar · topic 68.30 · version 0101 · 2014-11-08

Applies to: MODEL 447.6 with CODE V43 (Wood flooring) MODEL 447.7 with CODE V43 (Wood flooring) without CODE V33 (Floor covering in passenger compartment (carpeted)) without CODE V41 (Carpeted floor in passenger compartment)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 447 (models 6**, 7**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.34 Trunk lining — Series 447 (models 6**, 7**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.35 Load compartment trim — Series 447 (models 6**, 7**)

AR68.30-S-4785EE

Remove/install paneling on rear center section

24.10.2014

MODEL

447.6

with CODE V43 (Wood flooring)

MODEL

447.7

with CODE V43 (Wood flooring)

without CODE V33 (Floor covering in passenger compartment (carpeted))

without CODE V41 (Carpeted floor in passenger compartment)

Remove/install paneling on rear center section

Shown on MODEL 447.7 with CODE W54 (Two-wing rear-end door, 270 degrees)

1

Rear center section paneling

2

Screw

3

Screw

4

Frame seal

5

Door stop

S68.30-4668-05

Remove/install paneling on rear center section

Shown on MODEL 447.6 with CODE W65 (Liftgate)

1

Rear center section paneling

2

Screw

3

Screw

S68.30-4692-04

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip covers on screws (2) from rear center section paneling (1) with suitable screwdriver

2

Unscrew screws (2, 3)

3

Remove sealing frame (4) in area of stays (arrows) on rear center section paneling (1)

MODEL 447.6
with CODE V43 (Wood flooring)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
MODEL 447.6
with CODE V43 (Wood flooring)
with CODE W54 (2-wing rear-end door, 270 degrees)
MODEL 447.7
with CODE V43 (Wood flooring)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
without CODE V33 (Floor covering in passenger compartment (carpeted))
without CODE V41 (Carpeted floor in passenger compartment)
MODEL 447.7
with CODE V43 (Wood flooring)
with CODE W54 (2-wing rear-end door, 270 degrees)
without CODE V33 (Floor covering in passenger compartment (carpeted))
without CODE V41 (Carpeted floor in passenger compartment)

Installation: Ensure that sealing frame (4) is seated correctly.

4

Move rear center section paneling (1) toward rear until stays (arrows) can be removed below door check (5)

MODEL 447.6
with CODE V43 (Wood flooring)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
MODEL 447.6
with CODE V43 (Wood flooring)
with CODE W54 (2-wing rear-end door, 270 degrees)
MODEL 447.7
with CODE V43 (Wood flooring)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
without CODE V33 (Floor covering in passenger compartment (carpeted))
without CODE V41 (Carpeted floor in passenger compartment)
MODEL 447.7
with CODE V43 (Wood flooring)
with CODE W54 (2-wing rear-end door, 270 degrees)
without CODE V33 (Floor covering in passenger compartment (carpeted))
without CODE V41 (Carpeted floor in passenger compartment)

5

Remove rear center section (1) upward

6

Install in the reverse order

Referenced documents