Removing and installing trim panel at D-pillar

AR68.30-S-4495E

Removing and installing trim panel at D-pillar

21.12.2016

Model

447.7/8, 448

Modification notes

15.12.2016

Method extended

Operation steps 1, 6, 7, 8, 9

Shown on 447.7 with code SH8 (Windowbags driver, passenger and rear)

1

Cover

3

Cover

2

Screw

4

Retaining clips

Left and right side of vehicle on model 447.8 except model ZK7 (MARCO POLO equipment line) and right side of vehicle on model 448.8 except model W68 (Electrically actuated liftgate), shown with code SH8 (Windowbag for driver, passenger and rear)

5

Inner paneling

6

Lock

7

Actuator rod

8

Mounting clip

9

Screw

10

Outer cover

11

Retaining clips

Model 447.8 with code ZK7 (MARCO POLO equipment line)

12

Closet

14

Frame seal

13

Clip

15

Roller blind



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Open liftgate or rear-end door

2

Unclip cover (1)

Model 447.7/8, 448.8
with code SH8 (Windowbags for driver, front passenger and rear)

3

Remove screw/bolt (2)

Model 447.7/8, 448.8
with code SH8 (Windowbags for driver, front passenger and rear)

4

Remove rear curtain from paneling (3)

Model 447.7
with code ZH6 (Marco Polo ACTIVITY)

5.1

Unclip paneling (3) in lower area (arrows A) with long wedge and pull out of guide downward at top (arrows B)

Model 447.7, 448.7
Model 447.8
except code W68 (Electrically operated liftgate)
except code ZK7 (Equipment line MARCO POLO)

 Installation: Ensure that window and door frame seal are seated correctly.

 Long wedge

*115589035900

5.2

Unclip paneling (3) in lower area (arrows A) with long wedge and pull out of guide downward at top (arrows B)

Model 447.8
with code W68 (Electrically operated liftgate)
except code ZK7 (Equipment line MARCO POLO)
Model 448.8
When removing paneling (3) on left side of vehicle.

 Installation: Ensure that window and door frame seal are seated correctly.

 Long wedge

*115589035900

6

Remove roller sun blind in rear

Model 447.8
with code ZK7 (Equipment line MARCO POLO)

AR68.50-S-0002E

7

Open closet (12)

Model 447.8
with code ZK7 (Equipment line MARCO POLO)

8

Remove clip (13)

Model 447.8
with code ZK7 (Equipment line MARCO POLO)

9

Starting on left side, remove roller blind (15) from sealing frame (14) (arrow), and take out

Model 447.8
with code ZK7 (Equipment line MARCO POLO)

10

Unclip inner paneling (5) in side area (arrows C) with long wedge and pull out downward out of guides at top (arrows D)

Model 447.8
with code W68 (Electrically operated liftgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8

 Installation: Ensure that window guide seal is seated correctly.

 Long wedge

*115589035900

11

Open locks (6) and remove actuator rod (7) from drive for electrical liftgate

Model 447.8
with code W68 (Electrically operated liftgate)
Model 448.8

12

Remove retaining clip (8)

Model 447.8
with code W68 (Electrically operated liftgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8

13

remove screw/bolt (9)

Model 447.8
with code W68 (Electrically operated liftgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8

14

Remove outer paneling (10)

Model 447.8
with code W68 (Electrically operated liftgate)
Model 447.8
with code ZK7 (Equipment line MARCO POLO)
Model 448.8

 Installation: Ensure that window frame seal is seated correctly.

15

Prepare paneling (3) for installation

When replacing paneling (3).

Model 447.7
with code ZH6 (Marco Polo ACTIVITY)

AR68.30-S-0111-01E

16

Install in the reverse order



Check

17

Check electric liftgate for proper function

Model 447.8
with code W68 (Electrically operated liftgate)
Model 448.8