ar6830s4050e

Remove/install paneling on A-pillar

Type ar · topic 68.30 · version 0103 · 2020-02-24

Applies to: Model 447, 448

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 447 · Series 448

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 447 · Series 448

AR68.30-S-4050E

Remove/install paneling on A-pillar

17.10.2019

Model

447, 448

Remove/install paneling on A-pillar

Shown on right side of vehicle with code SH9 (Windowbags for driver and front passenger)

1

Cover

2

Cover

3

Screw

4

Supports

5

Sealing frame

S68.30-4625-06

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove cover (2).

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
Model 447, 448
with code SH9 (Windowbag for driver and co-driver)

Long wedge

*115589035900

2

Remove screw (3).

Model 447, 448
with code SH8 (Windowbags for driver, front passenger and rear)
Model 447, 448
with code SH9 (Windowbag for driver and co-driver)

3

Beginning at the top, unclip trim (1) and take off.

WIS Service Media
wsm://04_ 201901_09

Installation: Ensure that cover (1) is seated correctly in mounts (4).
Ensure that sealing frame (5) is installed correctly.

4

Install in the reverse order.

Remove/install paneling on A-pillar

115 589 03 59 00

Long wedge

Referenced documents