ar6830s1210a

Removing and installing multi-function unit

Type ar · topic 68.30 · version 0100 · 1999-01-21

Applies to: MODEL 638.0 with CODE (ZK6) Vito F (Travel) MODEL 638.1 with CODE (ZK5) Crew bus III luxury version (Vito L) MODEL 638.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 638 (models 0**, 1**, 2**)

EinPAS 25 On-board/network/multifunction › 25.15 Network/multifunction › 25.15.18 Switch/switch group/control panel — Series 638 (models 0**, 1**, 2**)

AR68.30-S-1210A

Removing and installing multi-function unit

6.10.98

MODEL 638.0 with CODE (ZK6) Vito F (Travel)

MODEL 638.1 with CODE (ZK5) Crew bus III luxury version (Vito L)

MODEL 638.2

Removing and installing multi-function unit
Removing and installing multi-function unit

S68.30-2515-02

1 Ashtray
2 Multi-function unit
3 Screws
4 Beverage holder
5 Catches
6 Loudspeaker cover

S68.30-2510-02

Removal, installation

1

Remove ashtray (1) in multi-function unit (2)

The multi-function units are located in the rear on the left and right in the side panels.

2

Unscrew screws (3)

3

Unclip multi-function unit (2) and remove

Open beverage holder (4). To remove press catches (5) upward slightly.

4

Disconnect connectors

5

Install in opposite order