AR68.30-S-1207S | Remove/install rear right-hand side paneling in rear | 7.2.08 |
MODEL 639.813 with CODE (ZK7) "Marco Polo" camper
S68.30-4580-11
1 Closing wedge countersection
2 Side paneling
3 Lamp
4 Screw
B14/1 Interior temperature display (Westfalia) temperature sensor
X58/12 Load compartment socket, right rear
Modification notes
| Remove/install | ||
| Notes on carrying out repair work in the vehicle interior | Model 639, 903, 906 | |
1 | Remove bed extension | ||
2 | Remove right paneling from bed extension bracket. | ||
3 | Remove right rear curtain from bottom curtain rail. | ||
4 | Remove moldings from D-pillar | ||
5 | Remove trim from C-pillar | ||
6 | Remove cupholder | ||
7 | Remove closing wedge countersection (1) | ||
8 | Remove bolt (4) | Remove cap for this purpose. | |
9 | Remove side paneling (2) | Slightly pull side paneling (2) toward front. | |
Long wedge | |||
10 | Disconnect electrical connector from right rear load compartment socket (X58/12) | ||
11 | Disconnect electrical connector from interior temperature display (Westfalia) temperature sensor (B14/1) | ||
12 | Disconnect electrical connectors from lamp (3). | ||
13 | Remove side paneling (2) | Installation: Ensure that window frame seal is seated correctly. | |
14 | Install in the reverse order | ||
| Checking | ||
15 | Check electric loads for proper function |
Long wedge
115 589 03 59 00
Referenced documents
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar6800s121801s Remove/install panelings on bed extension brackets
- ar6800s5204s 'Remove/install cup holder in rear
- ar6830s4490s Remove/install paneling on C-pillar
- ar6830s4495s Remove/install paneling on D-pillar
- ar6850s7820s Remove/install curtain on rear passenger compartment side window
- ar9175s0010s Removing and installing bed extension