Remove/install floor covering in passenger compartment

AR68.30-S-0005EE

Remove/install floor covering in passenger compartment

19.12.2019

Model

447.8

with code V41 (Carpeted floor in passenger compartment)

with code ZK7 (Equipment line MARCO POLO)

Model

447.8

with code V58 (Floor covering in yacht look, dark)

with code ZK7 (Equipment line MARCO POLO)

except code V33 (Floor covering in passenger compartment (carpeted))

Model

447.8

with code V60 (Yacht decking look)

with code ZK7 (Equipment line MARCO POLO)

except code V33 (Floor covering in passenger compartment (carpeted))

Modification notes

18.12.2019

Document concerning seat rail adjustment method completely revised.

AR91.21-S-3771-01E

Shown on MODEL 447.8 with CODE V60 (Ship deck look)

1

Floor covering

5

Cover

2

Guide rails

6

Cover

3

Cabinet

7

Guide rail

4

Kitchenette

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove cabinet (3).

AR86.60-S-0041E

2

Remove kitchenette (4).

AR86.60-S-0003E

3

Remove guide rails (2).

AR91.21-S-3771-01E

 Screw/bolt, guide rail to underfloor

*BA91.21-N-1001-01J

4

Remove rear right side trim in rear passenger compartment.

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

AR68.30-S-1207E

5

Remove trim (5) upward from both B-pillars.

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

6

Disconnect electrical connector from the rear footwell lighting and remove trim (5) from both B-pillars.

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

7

Remove door sill from the sliding door.

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

AR68.30-S-1312E

8

Remove cover (6) from the floor covering (1).

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

 Removal:
Remove cover (6) carefully.
Otherwise, the cover (6) may be damaged.

 Long wedge

*115589035900

9

Remove floor covering (1).

 MODEL 447.8 with CODE V41 (Passenger compartment floor covering)
Installation: Ensure that floor covering (1) is seated correctly below side paneling and rear center section paneling.

10

Cut floor covering (1) to size in the area of the guide rails (2).

MODEL 447.8 with CODE V41 (Passenger compartment floor covering)
When replacing floor covering (1).

 To be cut according to vehicle equipment.
The floor covering (1) to be replaced serves as template for this purpose.

11

Transfer guide rail (7) for table.

When replacing floor covering (1).

 Transfer assembly position of guide rail (7) to new floor covering (1).

12

Install in the reverse order.



Check

13

Perform function check of the rear footwell lighting.

Model 447.8 with code V58 (floor covering in dark ship deck look), model 447.8 with code V60 (ship deck look)

 Passenger seats

Number

Designation

Model 447.7/8, 448

BA91.21-N-1001-01J

Screw/bolt, guide rail to underfloor

Nm

45