ar6830p4810tx

Remove/install center paneling in trunk

Type ar · topic 68.30 · version 0100 · 2004-10-14

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 219 (models 3**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.34 Trunk lining — Series 219 (models 3**)

AR68.30-P-4810TX

Remove/install center paneling in trunk

1.9.04

MODEL 219.3

Remove/install center paneling in trunk

P68.30-3052-08

1 Center trunk lining

2 Retaining clips

Removal/installation

1

Remove left and right side paneling in trunk

AR68.30-P-4800TX

2

Pull center trunk lining (1) upward toward rear in area of through-loading opening and loosen

Installation: Ensure that center trunk lining (1) is seated correctly in area of through-loading opening.

3

Remove and install center trunk lining (1) upward from trunk

Installation: Ensure that retaining clips (2) are seated correctly on rear of center trunk lining (1).

Observe installation position of center trunk lining (1) in lower area.

4

Install in the reverse order

Referenced documents