Remove/install side paneling in trunk

AR68.30-P-4800MFB

Remove/install side paneling in trunk

21.08.2019

Model

247.0/7

Shown on model 247.0 on left side of vehicle

1

Cover

2

Tie-down eyes

3

Expansion rivet

X58/12

Luggage compartment socket

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove left and right C-pillar trim.

AR68.30-P-4490MFB

2

Remove rear-end center-section trim.

AR68.30-P-4786MFV

3

Remove edge guard in the working area.

 Installation: Ensure that edge guard is correctly positioned.

4

Remove tie-down eyes (2).

 Screw/bolt for tie-down eye

*BA68.50-P-1001-03I

5

Remove expansion rivets (3).

 Dismantling tool

*000589956300

6

Release trim (1) until the electrical connector of the trunk socket (X58/12) is accessible.

Model 247.0/7
with code U35 (12 V socket in load area)


Do not crush or kink or subject electric lines to tension.
This will result in damage to the electric lines and can impair their function.

7

Release and disconnect electrical connector of the trunk socket (X58/12).

Model 247.0/7
with code U35 (12 V socket in load area)

8

Remove trim (1).

 Installation:
Ensure that the trim (1) is inserted correctly in the adjacent trims.
Damage to adjacent trim can otherwise occur.

9

Change trunk socket (X58/12).

Model 247.0/7
with code U35 (12 V socket in load area)
When replacing trim (1).

10

Install in the reverse order.

 Cargo retainers

Number

Designation

Model 177, 247

BA68.50-P-1001-03I

Screw/bolt for tie-down eye

Nm

24