Remove/install side paneling in trunk

AR68.30-P-4800FF

Remove/install side paneling in trunk

13.8.03

 

Remove/Install

1

Move rear bench seat (7) to front-most position and fold over rear seat backrest

2

Open rear-end door

3

Remove edge guard (3) in area of left and right side luggage compartment lining (5)

4

Fold trunk floor cover (6) toward front

5

Remove expanding clips (2)

 Installation: Replace damaged expanding clips (2).



*452589016300

6.1

Remove expanding clips (9)

On vehicles except code (I31) Flexible luggage compartment cover

 Installation: Replace damaged expanding clips (9).



*452589016300

6.2

Remove luggage compartment cover console

On vehicles with code (I31) flexible luggage compartment cover

AR68.30-P-4730FF

7

Loosen side luggage compartment lining (5) in area of upper C-pillar paneling (1) and lower C-pillar paneling (8)

 Carefully pull side luggage compartment lining (5) out below upper C-pillar paneling (1) and lower C-pillar paneling (8)

 Installation: Ensure that side luggage compartment lining (5) is seated correctly.

8

Fold side luggage compartment lining (5) in area of lower C-pillar paneling (8) to inside and carefully pull out below rear center section paneling (4).

9

Remove side luggage compartment lining (5) from trunk

10

Install in the reverse order