Remove/install rear center section cover

AR68.30-P-4786FR

Remove/install rear center section cover

05.12.2017

Model

257

1

Rear center section paneling

3

Mounting clip

2

Edge guard

1

Rear center section paneling

4

Retaining clips

5

Retaining tabs

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Open trunk lid

2

Detach edge guard (2) in area of rear-end center-section trim (1)

3

Remove mounting clips (3)

 Clip remover

*452589016300

4

Lift trunk floor

5

Unclip rear center section paneling (1) from mounting clips (4)

6

Remove rear center section (1) upward

 Installation: Insert rear center section paneling (1) into body with retaining tabs (5).

7

Install in the reverse order