ar6830p4785r

Remove/install paneling on rear center section

Type ar · topic 68.30 · version 0106 · 2008-11-18

Applies to: MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 230 (models 4**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.34 Trunk lining — Series 230 (models 4**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.35 Load compartment trim — Series 230 (models 4**)

AR68.30-P-4785R

Remove/install paneling on rear center section

30.10.08

MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Remove/install paneling on rear center section

P68.30-3259-04

1 Rear center section paneling

2 Floor Covering

3 Expansion clip

4 Screw clips

E18/1 Trunk lamp

X58/1 Interior socket

Remove/install

1

Open trunk lid

2

Take floor covering (2) out of luggage compartment

3

Remove expansion clips (3)

Installation: Replace damaged expansion clips (3).

4

Remove screw clips (4).

Installation: Replace damaged screw clips (4).

5

Loosen rear center section paneling (1) from rear center section until electrical connectors on luggage compartment lamp (E18/1) and interior socket (X58/1) are accessible.

Lift rear center section paneling (1) over locking eye cover.

6

Disconnect electrical connectors from luggage compartment lamp (E18/1) and interior socket (X58/1)

Insulate socket with insulation tape to prevent short circuit

7

Remove paneling from rear center section (1)

8

Install in the reverse order