Remove/install side trim panel in rear

AR68.30-P-4780T

Remove/install side trim panel in rear

17.12.02

8.1.04

Disconnect/connect/remove ground lead from battery

 

Remove/Install

1

Remove left and right rear seat cushions

AR91.12-P-1020TB

2

Fold down left and right rear seat backrest

 See operator's manual.

3

Unclip left and right cover (1) from load compartment side trim panel (1) with mounting wedge



*110589035900

4

Cut stay on load compartment side trim panel (1) at cutting point (arrow) with sharp knife

5

Remove left and right load compartment side trim panel (1)

AR68.30-P-1180T

6

Remove left and right trim from C-pillar

AR68.30-P-4490TA

7

Unclip door sill molding (2) from rear entrance with mounting wedge



*110589035900

8

Remove expansion clip (3).

9

Fold back floor covering (4) until nut (5) is accessible

10

Unscrew nut (5)

11

Remove edge guard (6) in area of load compartment side trim panel (1)

12

Remove stop (7) from locking eye (8)

13

Remove bolts (9)

14

Unclip load compartment side trim panel (1) at retaining clips (10) from C-pillar with mounting wedge.

 Installation: Replace damaged retaining clips (10).



*110589035900

15

Remove load compartment side trim panel (1) until electrical connector of load compartment socket (X58/4) is accessible.

16

Disconnect electrical connector from load compartment socket (X58/4) and remove load compartment side trim panel (1).

17

Install in the reverse order