Remove/install side paneling in rear

AR68.30-P-4780QA

Remove/install side paneling in rear

12.2.03

22.1.04

Disconnect/connect ground line from battery removed

 

Remove/Install

1

Remove rear seat and rear backrest

AR91.12-P-1700QA

2

Remove bolts (1)

3.1

Unscrew bolt (2)

Except USA version code 494a passenger side

 Bolt on belt end fitting

*BA91.40-P-1001-01A

3.2

Remove belt tension sensor (B48/3)

With USA version code 494a passenger side

AR91.40-P-0630Q

4

Loosen bolt (3)

 Bolt on belt end fitting

*BA91.40-P-1001-01A

5.1

Lift belt end fitting (5) and move out seat belt (4)

Except USA version code 494a passenger side

 Installation: Ensure that seat belt (4) is installed properly.

6

Unclip trim panel (6)

Long wedge

*115589035900

7

Remove bolt (7)

8

Unclip cover (8) and unscrew bolts (12) below

9

Pull out seat belt extender (10) and unclip rosette (9)

10

Move seat belt (4) through seat belt extender (10) and rosette (9).

11

Remove side paneling (11).

 Installation: Check clip retainers (13) in side paneling (11), replace if necessary.

12

Unplug electrical connector at left rear power window switch (S20/1s3), right rear power window switch (S20/1s4)

13

Move seat belt (4) through side paneling (11) with rosette (9).

 Installation: Ensure that seat belt (4) is installed properly.

14

Install in the reverse order

15

Carry out seat belt function check

Number

Designation

Model
209.4

BA91.40-P-1001-01A

Belt end fitting bolt

Nm

30