Remove/install side paneling in rear

AR68.30-P-4780LC

Remove/install side paneling in rear

20.10.15

Model

217

1

Upper side paneling

1.1

Guide

1.2

Guide

2

Lower side paneling

3

Rail

4

Bolts

5

Expansion clip

6

Bolts

7

Seat belt guide

7.1

Toothed rack

8

Guide

9

Edge guard

10

Screw

11

Screw

1

Upper side paneling

1.3

Retaining clips

2

Lower side paneling

2.1

Retaining clips

7.1

Toothed rack

 

Remove/install

1

Completely move right front seat to foremost position

 Remove side paneling on right side of vehicle and analogously on left side of vehicle.

2.1

Remove right rear backrest

Model 217.3
When removing lower side paneling (2).

AR91.12-P-1620LF

2.2

Remove right rear backrest and lay airbag down to side with electrical line connected

Model 217.4
When removing lower side paneling (2).

AR91.60-P-0694LF

3

Lower right rear side window

4

Remove right-hand side entrance strip

AR68.30-P-4100LC

5

Remove edge guard (9) on right in area of upper and lower side paneling (1, 2)

6

Unclip strip (3)

 Mounting wedge

*110589035900

7.1

Remove bolts (4,10)

Model 217.4

7.2

Remove bolts (4)

Model 217.3

8

Remove seat belt from lower B-pillar

AR91.40-P-0630LC

9

Remove belt guide (7) with toothed rack (7.1)

 For this purpose pull belt guide (7) with toothed rack (7.1) toward front until toothed rack (7.1) is no longer engaged in motor.

10

Unclip upper side paneling (1) in direction of vehicle interior until electrical connector on upper side paneling (1) is accessible

 Installation: Ensure that retaining clips (1.3) are seated correctly.

11

Disconnect electrical connector from upper side paneling (1)

12

Remove upper side paneling (1) toward front

 Installation: Ensure that guide (8) is seated correctly.

13

Remove seat belt from guides (1.1, 1.2) and remove upper side paneling (1)

14

Remove expansion clip (5)

Model 217.3
When removing lower side paneling (2).

15.1

Remove screw/bolts (6)

Model 217.4
When removing lower side paneling (2).

15.2

Remove bolts (6,11)

Model 217.3
When removing lower side paneling (2).

16

Unclip lower side paneling (2) in direction of vehicle interior and remove

 Installation: Ensure that retaining clips (2.1) are seated correctly.

17

Disconnect electrical connector fro lower side paneling (2) and remove side paneling

18

Install in the reverse order