Removing and installing side paneling in rear

AR68.30-P-4780KA

Removing and installing side paneling in rear

18.1.10

 

Removing, installing

1

Open soft top

 Lay soft top down in soft top compartment, do not close soft top compartment cover

2

Remove rear seat and rear backrest

AR91.12-P-1700KA

3

Remove door sill molding (4)

4

Unscrew screws from belt end fitting for rear seat belt (6)



*BA91.40-P-1001-01A

5

Unscrew screw (7) from bottom sliding rail for seat belt



*BA91.40-P-1001-01A

6

Unscrew screw (2)

 For this purpose unclip cover (8) from rear paneling

7

Unscrew collar nut (5)

8

Unclip paneling (1) in area of B-pillar

 Three clips are located in the area of the B-pillar.

9

Pull paneling (1) out of window shaft seal and from welding bolt in area of rear seat backrest

Installation: Check mounting clips (3), replace if necessary

10

Pull belts out of paneling (1)

Installation: Ensure that seat belts are installed properly

11

Install in the reverse order

Number

Designation

Model
202, 208.3

Model 208.4

BA91.40-P-1001-01A

Belt end fitting screw

Nm

35

35