ar6830p4780eq

Remove/install side paneling in rear

Type ar · topic 68.30 · version 0100 · 2019-06-11

Applies to: Model 253 (except 253.992/993) Model 293

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 253 (models 142, 143, 146, 149, 180, 181, 184, 303, 305, 309, 311, 313, 315, 316, 319, 323, 325, 342, 343, 346, 349, 353, 354, 364, 380, 381, 384, 388, 389, 903, 905, 909, 911, 913, 914, 915, 916, 919, 923, 925, 942, 943, 946, 948, 949, 953, 954, 964, 980, 981, 983, 984, 988, 989) · Series 293

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 253 (models 142, 143, 146, 149, 180, 181, 184, 303, 305, 309, 311, 313, 315, 316, 319, 323, 325, 342, 343, 346, 349, 353, 354, 364, 380, 381, 384, 388, 389, 903, 905, 909, 911, 913, 914, 915, 916, 919, 923, 925, 942, 943, 946, 948, 949, 953, 954, 964, 980, 981, 983, 984, 988, 989) · Series 293

AR68.30-P-4780EQ

Remove/install side paneling in rear

22.05.2019

Model

253 (except 253.992/993)

Model

293

Remove/install side paneling in rear

Shown on model 253 up to model year 2020 with code 293 (rear sidebags) on the right-hand side of the vehicle and removed backrest

1

Side paneling

2

Edge guard

3

Nut

6

Nut

7

Covers

8

Screw

S54/11

Left rear backrest release button

S54/12

Right rear backrest release button

P68.30-3841-06

Remove/install

1

Remove seat cushion in rear passenger compartment.

AR91.12-P-1020LW

2

Release left and right seat backrests and fold forward.

3

Unclip cover over belt end fitting.

4

Remove nut (6).

5

Unclip covers (7).

6

Remove screws (8).

7

Remove the left/right rear door sill.

AR68.30-P-4100LW

8

Detach the edge guard (2) in the area of the left/right side paneling (1).

Installation: Ensure that edge guard (2) is seated correctly.

9

Remove nut (3).

10

Unclip the left/right side paneling (1) from the retaining clips (4).

The number of retaining clips (4) can vary according to vehicle model.

11

Disconnect the electrical connection (5) on the button for the left rear backrest release (S54/11) / button for the right rear backrest release (S54/12).

Model 253 (except 253.992/993)
up to model year 2020

12

Remove the feed-through grommet via the locking hook for the folding backrest in the rear.

13

Remove the left/right side paneling (1).

14

Install in the reverse order.

Referenced documents