ar6830p4780cw

Remove/install side paneling in rear

Type ar · topic 68.30 · version 0104 · 2013-01-26

Applies to: MODEL 204.0/2/9, 212.0/1

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 204 (models 0**, 2**, 9**) · Series 212 (models 0**, 1**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 204 (models 0**, 2**, 9**) · Series 212 (models 0**, 1**)

AR68.30-P-4780CW

Remove/install side paneling in rear

11.1.13

MODEL

204.0/2/9, 212.0/1

Remove/install side paneling in rear

Shown on model 204.0 with code (287) Through-loading feature

1

Side bolster

2

Side paneling

3

Edge guard

4

Rear door sill molding

5

Clip (model 204)

6

Clips

P68.30-3443-06

Remove/install

1.1

Remove left and right rear seat backrest side bolsters (1)

MODEL 204.0, 212.0
with CODE 287 (Through-loading feature)
MODEL 204.2/9

MODEL 204.2/9

AR91.12-P-1710CX

MODEL 204.0, 212.0
with CODE 287 (Through-loading feature)

AR91.12-P-1710CW

1.2

Remove rear seat backrest

MODEL 204.0, 212.0/1
without CODE 287 (Through-loading feature)

MODEL 204.0
MODEL 212.0/1

AR91.12-P-1620CW

MODEL 212
with CODE 224 (Rear individual seat design)

AR91.12-P-1620EW

2.1

Unclip rear door sill (4) in area of B-pillar and remove toward front

MODEL 204.0/2/9

2.2

Remove rear door sill (4)

MODEL 212.0/1

AR68.30-P-4100EW

3

Remove edge guard (3) in area of side paneling (2)

4

Remove clip (5)

MODEL 204.0/2/9

5

Unscrew nut

MODEL 212.0/1

Side paneling (2) is fastened with two nuts instead of clips (5).

6

Unhook clips (6) from body flange

7

Remove side paneling (2)

Installation: Ensure that side paneling (2) is seated correctly in paneling on C-pillar.

8

Install in the reverse order

Referenced documents