Remove/install rear wall paneling

AR68.30-P-4750RR

Remove/install rear wall paneling

12.04.2019

Model

452.3/4

1

Belt guide

2

Cover

3

Seat belt guide bracket

4

Mounting screw

5

Screw

6

Clips

7

Roll bar paneling

8

Rear wall paneling

9

Soft top module carrier

 

Remove/install

 Caution

Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Push seats into the front position

2

Remove CD changer

AR82.64-P-7508RR

 Only model 452.3 /4 with CD changer (DFO/FFO), code C03.

3

Unclip right and left plastic cover from the center armrest

 Only model 452.3 /4 as of model year 2005, if installed.

 Do not damage plastic parts.

4

Detach right and left rubber door seals from the bodyshell flange

 Do not damage door seals.

5

Unhook the seat belt from the belt guide (1) on the seat

6

Remove cover (2) from seat belt guide bracket (3)

 Do not damage plastic parts.

7

Remove mounting screw (4) from seat belt guide bracket (3)

 Installation: Observe official torque specifications.

 Bolt, upper seat belt guide bracket

*BA91.40-P-1002-01G

8

Remove right and left clips (6) and remove right and left screw (5)

 Picture A shows the position of the screw (5) on model 452.3.

 Do not damage plastic parts.

9

Remove right and left roll bar trim (7)

10

Take off rear panel trim (8) and remove

 Unhook right and left rear panel trim (8) from the bodyshell flange and carefully pull under the soft top module carrier (9).

11

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 452.3/4

BA91.40-P-1002-01G

Bolt, upper seat belt guide bracket

Nm

30