Remove/install paneling on B-pillar

AR68.30-P-4700S

Remove/install paneling on B-pillar

15.07.2020

Model

223

except code Z07 (B7 armoring on special protection version)

P68.30-A058-82

1

Upper B-pillar paneling

2

Lower B-pillar paneling

3

Support

4

Air ducting

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Move front seat to the front end position.

2

Remove front and rear door sill panels.

If the bottom B-pillar trim (2) is removed.

 Long wedge

*115589035900

3

Release edge guards in the area of the B-pillar.

 Installation: Ensure that edge guard is seated correctly.

4

Release seat belt end fitting.

Model 223
except code 562 (Driver seat belt buckle with integrated tensioning function)
except code Z07 (B7 armoring on special protection version)

AR91.40-P-1030-02S

Model 223
with code 562 (Driver seat belt buckle with integrated tensioning function)
except code Z07 (B7 armoring on special protection version)

AR91.40-P-1030-02SA

5

Unclip top B-pillar trim (1) and extend to the roof lining.

 Installation: Position mount (3) of the top B-pillar trim (1) on the guide on the seat belt guide bracket.

 Installation: Ensure that the air ducting (4) is seated correctly in the top B-pillar trim (1).

 Long wedge

*115589035900

6

Guide seat belt through the opening on the top of the top B-pillar trim (1).

7

Unclip bottom B-pillar trim (2) and extend upward.

If required.

 Long wedge

*115589035900

8

Install in the reverse order.