ar6830p4700m

Remove/install paneling on B-pillar

Type ar · topic 68.30 · version 0104 · 2010-01-19

Applies to: MODEL 220

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 220

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 220

AR68.30-P-4700M

Remove/install paneling on B-pillar

18.1.10

MODEL 220

Remove/install paneling on B-pillar

P68.30-2037-09

1 Paneling (B-pillar)

2 Mount

5 Screw

6 Screw

3 Retaining clamp

4 Belt end fitting

Remove

1

Remove lumbar support control valve for rear seat backrest

AR91.12-P-1670M

2

Remove door sill molding on front and rear doors

Rear door sill molding screwed in area of lumbar support control valve

3

Remove edge guard in area of paneling (1)

4

Press paneling (1) out of retaining clips (3) with screwdriver

5

Unscrew screw (5) from belt end fitting (4)

6

Pull out belt at paneling (1) and detach paneling

Install

7

Check retaining clips (3) (7 each) on B-pillar

8

Guide belt end fitting (4) through opening in paneling (1)

9

Guide bolt (6) into mount (2) for
paneling (1)

10

Clip paneling (1) to retaining clips (3)

11

Screw belt end fitting (4) to driver's seat with bolt (5) so that it still can be moved

*BA91.40-P-1001-01A

12

Install edge guard on B-pillar

13

Install front and rear door sill molding

14

Remove lumbar support control valve for rear seat backrest

AR91.12-P-1670M

15

Check adjustable upper belt guide fitting on B-pillar for proper function

Seat belts/belt tensioners

Number

Designation

Model 220

BA91.40-P-1001-01A

Screw on belt end fitting

NM

30

Referenced documents