ar6830p4700fr

Remove/install paneling on B-pillar

Type ar · topic 68.30 · version 0101 · 2018-09-10

Applies to: Model 257 Model 290

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 257 · Series 290

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 257 · Series 290

AR68.30-P-4700FR

Remove/install paneling on B-pillar

26.06.2018

Model

257

Model

290

Remove/install paneling on B-pillar

P68.30-4027-09

Shown on model 257

1

Upper B-pillar paneling

3

Support

2

Lower B-pillar paneling

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Move front seat toward the front to end position.

2

Remove front and rear door sills.

3

Remove outer trim from seat frame.

AR91.10-P-1201FR

4

Remove seat belt end fitting.


Model 257, 290
with code 460 (Canada version)
Model 257, 290
with code 494 (US version)

AR91.40-P-1030-02FRA

Model 257, 290
except code 460 (Canada version)
except code 494 (US version)

AR91.40-P-1030-02FR

5

Detach edge guard in area of upper B-pillar trim (1) and in area of lower B-pillar trim (2).

Installation: Ensure that edge guard is seated correctly.

6

Unclip upper B-pillar trim (1) at retaining tabs (arrows), guide out in downward direction, and remove from seat belt.

Installation: Position support (3) of upper B-pillar trim (1) on screw at seat belt guide bracket.

Long wedge

*115589035900

7

Unclip lower B-pillar trim (2) and remove.

Long wedge

*115589035900

8

Install in the reverse order.

Remove/install paneling on B-pillar

115 589 03 59 00

Long wedge

Referenced documents