Remove/install rear shelf

AR68.30-P-4581FR

Remove/install rear shelf

29.11.2017

Model

257

1

Rear shelf

3

Screw

2

Spacer

4

Catch

Shown on model 257 with code 811 (Advanced Sound System) and with code 540 (Electric roller sunblind for rear window)

1

Rear shelf

7

Electrical connector

5

Electrical connector

8

Cover

6

Electrical connector

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove both C-pillar trims and guide out of working area along seat belts

AR68.30-P-4490FR

 Do not remove belt end fittings.

2.1

Fold over folding seat backrests

Model 257
with code 287 (Folding seat backrests in rear passenger compartment)

2.2

Remove backrest in rear

Model 257
except code 287 (Folding seat backrests in rear passenger compartment)

AR91.12-P-1713FR

3

Remove anchor fitting of center seat belt

Model 257
except code 287 (Folding seat backrests in rear passenger compartment)

 Installation: Ensure bulb is correctly installed.

 Bolt, rear belt end fitting

*BA91.40-P-1005-01U

4

Remove spacers (2)

 Clip remover

*452589016300

5

Loosen screws/bolts (3)

6

Release catches (4) on rear shelf (1) and push rear shelf (1) slightly toward front

 Installation: Ensure correct seating of arrests (4).

7

Disconnect electrical connection (5)

8

Disconnect electrical connector (6)

Model 257
with code 540 (Electric sunblind for rear window)

9

Disconnect electrical connector (7)

Model 257
with code 810 (Sound system)
Model 257
with code 811 (Advanced sound system)

10

Lift rear shelf (1) and guide center seat belt with anchor fitting through cover (8) of center seat belt guide

Model 257
except code 287 (Folding seat backrests in rear passenger compartment)

11

Remove rear shelf (1) from vehicle

 Helper required.

12

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 257

BA91.40-P-1005-01U

Bolt, rear belt end fitting

Nm

35