AR68.30-P-4580TB | Remove/install and disassemble rear shelf | 15.11.02 |
MODEL 211.0
with CODE (540a) Electric roller blind for rear window
except CODE (287a) Through-loading feature
P68.30-2675-08
1 Rear shelf trim
2 Expansion rivet
3 Electrical connector
6 Rear speaker cover
7 Electric roller blind
4 Nut
5 Bolt
P82.62-2417-08
8 Speaker housing
9 Electrical connector (with code (810) Sound system)
10 Retaining clip
11 Wiring harness
H4/17x1 Bass speaker connector 1
H4/17x2 Bass speaker connector 2
H4/7 Left rear speaker (with code (810) Sound system)
H4/8 Right rear speaker (with code (810) Sound system)
H4/17 Bass module speaker
| Remove/Install | ||
1 | Remove rear seat backrest | ||
2 | Remove rear headrests | ||
3 | Remove trim at both C-pillars | Do not detach belt end fitting. | |
4 | Remove expansion rivets (2) | ||
5 | Unscrew nuts (4) and bolts (5) | Accessible through trunk. | |
6 | Lift rear shelf trim (1) and unclip rear speaker cover (6) | ||
7 | Disconnect woofer connector 1 (H4/17x1) and woofer connector 2 (H4/17x2) from woofer (H4/17) | ||
8.1 | Disconnect electrical connectors (9) from left rear speaker (H4/7) and right rear speaker (H4/8) | On vehicles with code (810) Sound system | |
9 | Take off retaining clips (10) and remove wiring harness (11) from speaker housing (8) | ||
10 | Turn speaker housing (8) counterclockwise until it unlocks | ||
11 | Lift rear shelf trim (1), pull toward front together with speaker housing (8) and remove speaker housing (8) | Pay attention to insulating mat below rear shelf trim (1) | |
12 | Disconnect electrical connector (3) and remove rear shelf trim (1) | ||
13.1 | Remove electric roller blind (7) | Only when replacing rear shelf trim (1) | |
14 | Install in the reverse order |
Referenced documents
- ar6830p4490t Remove/install trim at C-pillar
- ar6850p4600t Remove/install electric sun shade for rear window
- ar9112p1620t Remove/install rear seat backrest
- ar9116p1770t Removing rear head restraint